Netgear WN2500RP User Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 86
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
Manage the Extender Network and Security Settings
43
N600 WiFi Range Extender
For four minutes, the extender attempts to find the WiFi device (that is, the client) that you
want to join the extender’s WiFi network.
9. Within four minutes, go to the WiFi device and use its WPS software to join the network
without entering a password.
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Maintenance >
Attached Devices.
The WiFi device displays onscreen.
Manage the Extender WiFi Settings
You can change the network name (SSID) for the extender’s network and set up WiFi
security. If you did not change these settings already during initial setup, the network name is
NETGEAR_EXT, and the network is open (no WiFi security is set up).
Note: Although the WiFi security of the extender’s network can be different
from the WiFi security of the network that the extender is connected
to, you typically would select the same type of WiFi security for both
networks.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this happens,
experiment with different channels to see which is the best.
When you use more than one WiFi router or access point, it is better if adjacent routers or
access points use different channels to reduce interference. NETGEAR recommends a
channel spacing of four channels between adjacent routers or access points (for example,
use Channels 1 and 5, or 6 and 10).
Note: You can change the channel only if you have enabled FastLane
Technology or if the extender is not connected to the WiFi router. For
more information, see Set the Operating Mode to FastLane Technology
on page 61. When the extender is in normal operating mode (also
referred to as Internet Surfing mode), you cannot change the channel.
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Comments to this Manuals

No comments