Netgear WN2500RP User Manual download pdf (Page 71)

Maintain and Monitor the Extender

N600 WiFi Range Extender

Return the Extender to Its Factory Default Settings

Under some circumstances (for example, if you have lost track of the changes that you made

to the extender settings), you might want to erase the configuration and reset it to factory

default settings.

To reset the extender to factory default settings, you can use either the Restore Factory

Settings button on the rear panel or the Erase function. However, if you have lost the

password to access the extender, you must use the Restore Factory Settings button.

For a list of factory default settings, see Factory Default Settings

on page 85.

Use the Restore Factory Settings Button

CAUTION:

This process erases any settings that you have configured in the extender.

 To reset the extender to factory default settings:

1. Insert a straightened paper clip into the hole of the Restore Factory Settings button

and hold it for about seven seconds.

Restore Factory Settings button

2. Release the button.

The extender resets and restarts. This process takes about one minute.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 85 86

No comments

Netgear WN2500RP User Manual Page 71