Netgear WN2500RP User Manual download pdf (Page 75)

Maintain and Monitor the Extender

N600 WiFi Range Extender

The following table describes the fields on the Status screen.

Field Description

Hardware Version The hardware version of the extender.

Firmware Version The current firmware version of the extender. If you upgrade the firmware, this field

changes.

GUI Language Version The language version that is set on the extender. If you upgrade the firmware, this

field might change.

Region The region in which you operate the extender.

Note: If you purchased the extender in the United States or Canada, by default,

the region is North America.

Connection Status to Existing Network (2.4GHz)

Name (SSID) The name (SSID) of the WiFi network in the 2.4 GHz band to which the extender is

connected.

Link Rate The combined transmission (Tx) and receive (Rx) link rate in Mbps of the current

WiFi connection in the 2.4 GHz band.

Connection Status Shows whether the extender is connected to the WiFi network in the

2.4 GHz band.

If the extender is disconnected from the WiFi network in the 2.4 GHz band, a

Connect button displays. Click the Connect button connect the extender to the

WiFi network in the 2.4 GHz band.

Note: The extender can be connected simultaneously to a network in the

2.4 GHz

band and to a network in the 5 GHz band. If you have a dual band WiFi

router, the router can broadcast the same network name (SSID) simultaneously in

both bands.

Connection Status to Existing Network (5GHz)

Name (SSID) The name (SSID) of the WiFi network in the 5 GHz band to which the extender is

connected.

Link Rate The combined transmission (Tx) and receive (Rx) link rate in Mbps of the current

WiFi connection in the 5 GHz band.

Connection Status Shows whether the extender is connected to the WiFi network in the 5 GHz band.

If the extender is disconnected from the WiFi network in the 5 GHz band, a

Connect button displays. Click the Connect button connect the extender to the

WiFi network in the 5 GHz band.

Note: The extender can be simultaneously connected to a network in the

5 GHz

band and to a network in the 2.4 GHz

band. If you have a dual band WiFi

router, the router can broadcast the same network name (SSID) simultaneously in

both bands.

Extender IP Info

MAC Address The physical address of the extender.

IP Address The IP address of the extender. The default is 192.168.1.250.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

Comments to this Manuals

No comments

Netgear WN2500RP User Manual Page 75

Comments to this Manuals

Related products and manuals for Routers Netgear WN2500RP