Netgear R6300 User Manual download pdf (Page 100)

Advanced Settings

100

R6300 WiFi Router 802.11ac Dual Band Gigabit

 To set up a static route:

1. Select Advanced > Advanced Setup > Static Routes, and click Add to display the

following screen:

2. In the Route Name field, type a name for this static route (for identification purposes only.)

3. Select the Private check box if you want to limit access to the LAN only

. If Private is

selected, the static route is not reported in RIP.

4. Select the Active check box to make this route ef

fective.

5. T

ype the destination IP address of the final destination.

6. T

ype the IP subnet mask for this destination. If the destination is a single host, type

255.255.255.255.

7. T

ype the gateway IP address, which has to be a router on the same LAN segment as the

R6300 WiFi Router.

8. T

ype a number from 1 through 15 as the metric value.

This value represents the number of routers between your network and the destination.

Usually

, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.

9. Click Apply to add the static route.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 127 128

No comments

Netgear R6300 User Manual Page 100