Netgear R6200 User Manual download pdf (Page 29)

Genie Basic Settings

Dual Band 11ac WiFi Router R6200

1. On the Basic Home screen, select Wireless to display the Wireless Settings screen.

You can scroll down to view the 5 GHz wireless network settings. The screen sections,

settings, and procedures are explained in the following sections.

2. Make any changes that are needed and click Apply to save your settings.

3. Set up and test your wireless devices and computers to make sure that they can connect

wirelessly

. If they do not, check the following:

• Is your wireless device or computer connected to your network or another wireless

network in your area? Some wireless devices automatically connect to the first open

network (without wireless security) that they discover

• Does your wireless device or computer show up on the

Attached Devices screen? If it

does, then it is connected to the network.

• If you are not sure what the network name (SSID) or password is, look on the label on

the bottom of your router.

Wireless Settings Screen Fields

Region Selection

The location where the router is used. Select from the countries in the list. In the United

States, the region is fixed to United States and is not changeable.

Wireless Network

2.4 GHz b/g/n and 5.0 GHz a/n/ac

The b/g/n and a/n notation references the 802.11 standards of conformance. For instance,

the 2.4 b/g/n conforms to 802.11b, 802.11g, and 802.11n at 2.4 GHz radio frequency.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 129 130

No comments

Netgear R6200 User Manual Page 29