Netgear N600 User Manual download pdf (Page 85)

Advanced Settings

N600 Wireless Dual Band Gigabit Router WNDR3700v4

4. Click Add. The service appears in the list in the screen.

Add a Custom Service

To define a service, game, or application that does not appear in the Service Name list, first

determine which port number or range of numbers the application uses. Usually, you can

determine this information by contacting the publisher of the application or the relevant user

groups or news groups.

 To add a custom service:

1. Select Advanced >

Advanced Setup > Port Forwarding/Port Triggering.

2. Select Port Forwarding as the service type.

3. Click the Add Custom Service button to display the following screen:

4. In the Service Name field, enter a descriptive name.

5. In the Protocol list, select the protocol. If you are unsure, select TCP/UDP.

6. Specify the port settings:

• External Starting Port and External Ending Port.

These are the starting number

and ending number for the public ports at the Internet interface. For single port

forwarding, number in the External Starting Port and External Ending Port fields can

be the same. The range is from 1 to 65534.

• Use the same port range for Internal port.

This check box is selected by default. If

you want to use different ports, clear this check box and specify the internal ports.

• Internal Starting Port and Internal Ending Port.

These are the starting number and

ending number for the ports of a computer on the router’s local area network (LAN).

These are private ports. The router calculates the internal ending port.

7. In the Internal IP Address field, enter the IP address of your local computer that will provide

this service.

8. Click Apply.

The service appears in the list in the Port Forwarding/Port Triggering screen.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 110 111

No comments

Netgear N600 User Manual Page 85