Netgear N600 User Manual download pdf (Page 78)

Advanced Settings

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Disable Wireless Client Association. If your router is the repeater, selecting this check

box means that wireless clients cannot associate with it. Only LAN client associations are

allowed.

- If you are setting up a point-to-point bridge, select this check box.

- If you want all client traffic to go through the other access point (repeater with wireless

client association), leave this check box cleared.

Base Station MAC Address. If your router is the repeater, enter the MAC address for the

access point that is the base station.

• Wireless Base Station. If your router is the base station, select this radio button.

Disable Wireless Client Association. If your router is the base station, selecting this

check box means that wireless clients cannot associate with it. Only LAN client

associations are allowed.

Repeater MAC Address (1 through 4). If your router is the base station, it can act as the

“parent” of up to four other access points. Enter the MAC addresses of the other access

points in these fields.

Set Up the Base Station

The wireless repeating function works only in hub and spoke mode. The units cannot be

daisy-chained. You have to know the wireless settings for both units. You have to know the

MAC address of the remote unit. First, set up the base station, and then set up the repeater.

 To set up the base station:

1. Set up both units with the same wireless settings (SSID, mode, channel, and security).

The wireless security option must be set to None or WEP.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 110 111

No comments

Netgear N600 User Manual Page 78