Netgear N600 User Manual download pdf (Page 79)

Advanced Settings

N600 Wireless Dual Band Gigabit Router WNDR3700v4

2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the

Wireless Repeating Function screen.

Scroll to view

more settings

3. Select the Enable Wireless Repeating Function check box and select the Wireless Base

Station radio button.

4. Enter the MAC address for one or more repeater units.

5. Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the

wireless connection to the base station.

Note: If you are using the WNDR3700v4 base station with a non-NETGEAR

router as the repeater, you might need to change additional

configuration settings. In particular, you should disable the DHCP

server function on the wireless repeater AP.

 To configure the router as a repeater unit:

1. Log in to the router that will be the repeater

2. Select Basic > W

ireless Settings and verify that the wireless settings match the base unit

exactly. The wireless security option must be set to None or WEP.

3. Select Advanced > W

ireless Repeating Function, and select the Enable Wireless

Repeating Function check box and the Wireless Repeater radio button.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 110 111

No comments

Netgear N600 User Manual Page 79