Netgear Modem FVS318N User Manual Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 425
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
Wireless Configuration and Security
114
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Before You Change the SSID, WEP, and WPA Settings
For a new wireless network, print or copy the following form and fill in the settings. For an
existing wireless network, the network administrator can provide this information. Be sure to
set the Country/Region correctly as the first step.
_________________________________________________________________________
Store this information in a safe place:
SSID
The service set identifier (SSID) identifies the wireless local area
network. You can
customize it by using up to 32 alphanumeric characters. Write your SSID on the line.
SSID:
___________________________________
The SSID in the wireless access point is the SSID you configure on the wireless adapter
card
. All wireless nodes in the same network need to be configured with the same SSID.
WEP
key size, key format, authentication type, and passphrase
Choose the key size by circling one: 64 or 128 bits.
Choose the key format by circling one: ASCII or HEX.
Choose the authentication type by circling one: Open or Shared.
Passphrase:
___________________________________
Note: If you sele
ct shared key, the other devices in the network will not connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless VPN firewall.
WP
A-PSK (Pre-Shared Key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK passphrase:
________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK passphrase:
________________________________
WPA RADIUS settings
For WPA, record the following settings for the p
rimary and secondary RADIUS servers:
Server name/IP address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared secret:
___________________________________
WP
A2 RADIUS settings
For WPA2, record the following settings for the
primary and secondary RADIUS servers:
Server name/IP address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared secret:
___________________________________
_________________________________________________________________________
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 424 425

Comments to this Manuals

No comments