Netgear Modem FVS318N User Manual Page 287

  • Download
  • Add to my manuals
  • Print
  • Page
    / 425
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 286
Virtual Private Networking Using SSL Connections
287
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
5. Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table
on the Policies screen. The new policy goes into effect immediately.
Apply
Policy to?
(continued)
IP Address
(continued)
Permission From the drop-down list, select Permit or Deny to specify
whether the policy permits or denies access.
IP Network Policy Name A descriptive name of the SSL VPN policy for identification and
ma
nagement purposes.
IP Address The network IPv4 or IPv6 network address to which the SSL
VPN policy is applied.
IPv4 screen
on
ly
Subnet
Mask
The IPv4 network subnet mask to which the SSL
VPN policy is applied.
IPv6 screen
on
ly
IPv6 Prefix
Length
The IPv6 prefix length that apples to the network
to which the SSL VPN policy is applied.
Port Range /
Por
t Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN po
licy is applied:
VPN T
unnel. The policy is applied only to a VPN tunnel.
Port Fo
rwarding. The policy is applied only to port
forwarding.
All.
The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select Permit or Deny to
specify
whether the policy permits or denies access.
All
Addresses
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Port Range /
Por
t Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN po
licy is applied:
VPN T
unnel. The policy is applied only to a VPN tunnel.
Port Fo
rwarding. The policy is applied only to port
forwarding.
All.
The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select Permit or Deny to
specify
whether the policy permits or denies access.
Table 70. Add SSL VPN Policy screen settings (continued)
Setting Description
Page view 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 424 425

Comments to this Manuals

No comments