Netgear Modem FVS318N User Manual download pdf (Page 337)

Network and System Management

337

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

2. To specify a new SNMP configuration, in the Create New SNMP Configuration Entry section

of the screen, enter the settings as explained in the following table:

3. Click Add

to add the new SNMP configuration to the SNMP Configuration table.

 To edit an SNMP configuration:

1. On the

SNMP screen (see the previous figure), click the Edit button in the Action

column of the SNMP Configuration table for the SNMP configuration that you want to

modify. The Edit SNMP screen displays:

Figure 201.

2. Modify the settings as explained in the previous table.

3. Click App

ly to save your settings.

Table 80. SNMP screen settings

Setting Description

IP Address Enter the IP address of the new SNMP manager.

Subnet Mask Enter the subnet mask of the new SNMP manager.

Note the following:

• If you want to narrow down the number of device

s that can access the wireless

VPN firewall through the host IP address and receive traps, enter an IP address

with a subnet mask of 255.255.255.252.

• If you want to allow a subnet to access the wireless VPN firewall through the host

IP a

ddress and receive traps, enter an IP address with a subnet mask of

255.0.0.0. The traps are received at the IP address, but almost the entire subnet

has access through the community string.

SNMP Version From the drop-down list, select the SNMP version:

• v1. SNMPv1.

• v2

c. SNMPv2c.

• v3. SNMPv3.

Port Enter the port number of the new SNMP man

ager. The default port number is 162.

Community Enter the community string that allows the SNMP manager access to the MIB

objects of the wireless VPN firewall for the purpose of reading only.

1 2 ... 332 333 334 335 336 337 338 339 340 341 342 ... 424 425

No comments

Netgear Modem FVS318N User Manual Page 337