Netgear DGND3700B User Manual download pdf (Page 104)

Advanced Settings

104

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2

2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the

Wireless Repeating Function screen.

Scroll to view

more settings

3. In the Wireless Repeating Function screen (depending on the frequency you want to use),

select the Enable Wireless Repeating Function check box and select the Wireless Base

Station radio button.

4. Enter the MAC address for one or more repeater units.

5. Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the

wireless connection to the base station.

Note: If you are using the DGND3700v2 base station with a non-NETGEAR

wireless modem router as the repeater, you might need to change

additional configuration settings. In particular, you should disable the

DHCP server function on the wireless repeater AP.

 To configure the wireless modem router as a repeater unit:

1. Log in to the wireless modem router that will be the repeater

. Select Basic > Wireless

Settings and verify that the wireless settings match the base unit exactly. The wireless

security option has to be set to WEP or None.

2. Select Advanced > Advanced Setup > Wireless Repeating Function, and select the

Enable W

ireless Repeating Function check box and the Wireless Repeater radio button.

3. Fill in the Repeater IP

Address field. This IP address has to be in the same subnet as the

base station, but different from the LAN IP of the base station.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 147 148

No comments

Netgear DGND3700B User Manual Page 104