Netgear DC112A User's Guide download pdf (Page 31)

Internet Setup

AirCard Smart Cradle

2. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.

A login prompt displays.

3. Enter the cradle user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection T

ype list, select Auto Config.

The screen adjusts:

The cradle automatically detects the information in the following fields:

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the cradle’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the cradle’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. (Optional) In the DHCP User Class (If Required) field, enter a host name.

Most people can leave this field blank, but if your ISP gave you a specific host name,

enter it here.

7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.

You can type the domain name of your IPv6 ISP. Do not enter the domain name for the

IPv4 ISP here. For example, if your ISP’

s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz

as the domain name. If your ISP provided a domain name, type it in this field. For

example, Earthlink Cable might require a host name of home, and Comcast sometimes

supplies a domain name.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 155 156

No comments

Netgear DC112A User's Guide Page 31