Netgear DC112A User's Guide Page 75
- Page / 156
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Network Settings
75
AirCard Smart Cradle
3. Enter the cradle user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Setup > LAN Setup.
5. In the IP Address field, type the IP address.
6. In the IP Subnet Mask, type the subnet mask of the cradle.
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or cradle.
7. Change the RIP settings.
Router Information Protocol (RIP) allows the cradle to exchange routing information with
other routers.
a. In the RIP Direction list, select one of the following:
• Both.
The cradle broadcasts its routing table periodically and incorporates
information that it receives.
• Out Only.
The cradle broadcasts its routing table periodically.
• In Only.
The cradle incorporates the RIP information that it receives.
b. In the RIP V
ersion list, select one of the following:
• Disabled.
This is the default setting.
• RIP-1.
This format is universally supported. It is adequate for most networks,
unless your network setup is unusual.
• RIP-2.
This format carries more information. Both RIP-2B and RIP-2M send the
routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses
multicasting.
8. Click the Apply button.
- AirCard® Smart Cradle 1
- Compliance 2
- Trademarks 2
- Contents 3
- Chapter 6 Network Settings 4
- Chapter 11 Troubleshooting 6
- Front Panel 8
- Table 1. LED descriptions 9
- Rear Panel 10
- Hardware Setup 11
- Position the Smart Cradle 13
- Install Your Smart Cradle 14
- Connect to the AirCard Smart 16
- Wired Connection 17
- WiFi Connection 17
- Types of Logins 18
- Change the Language 18
- Internet Setup 20
- Manage a Mobile Hotspot 21
- Internet port 22
- Scroll to 26
- Change the MTU Size 39
- Table 2. Common MTU sizes 40
- Control Internet Access 41
- Set Up Parental Controls 42
- To set up access control: 44
- To block Internet sites: 47
- To block services: 48
- To schedule blocking: 50
- To add a custom service: 54
- Set Up Port Triggering 57
- Add a Port Triggering Service 58
- Enable Port Triggering 59
- Optimize Performance 61
- To enable upstream QoS: 62
- Add QoS Rules 63
- Set Up QoS for a MAC Address 66
- Edit an Upstream QoS Policy 67
- Delete an Upstream QoS Policy 67
- To disable WMM QoS: 69
- Network Settings 70
- View WAN Settings 71
- Reserve LAN IP Addresses 78
- Specify Basic WiFi Settings 80
- To change the WPA settings: 83
- Set Up a Guest Network 84
- Control the Wireless Radios 86
- Set Up a Wireless Schedule 87
- Specify WPS Settings 88
- Cable this port to a LAN port 89
- Smart WiFi Router 91
- To set up bridge mode: 92
- To set up Facebook WiFi: 94
- Change the admin Password 98
- Recover the admin Password 99
- AirCard Smart Cradle 100
- AirCard Smart Cradle 101
- Back Up Settings 103
- Custom Static Routes 106
- Edit a Static Route 107
- Delete a Static Route 108
- Remote Management 109
- Monitor Internet Traffic 111
- 6. Click the Apply button 113
- Your settings are saved 113
- USB Device Requirements 115
- Access a USB Device 115
- Use FTP Within the Network 120
- To view network folders: 121
- To add a network folder: 122
- To edit a network folder: 123
- Approve USB Devices 124
- Safely Remove a USB Device 125
- This takes the drive offline 126
- Internet 127
- To set up FTP access: 128
- Your Personal FTP Server 130
- FTP Directory: FTP:// 131
- FTP Directory: 131
- To change your settings: 134
- Share a USB Printer 135
- To download the utility: 137
- To install the utility: 137
- Use the Shared Printer 138
- To change the language: 142
- To specify the time-out: 142
- Troubleshooting 144
- Troubleshoot with the LEDs 145
- Cannot Log In to the Cradle 146
- Cannot Access the Internet 147
- Troubleshoot PPPoE 148
- Changes Not Saved 149
- Cellular Network Connectivity 150
- WiFi Connectivity 150
- Supplemental Information 153
- Factory Settings 154
- Supplemental Information 155
- Technical Specifications 156
Related products and manuals for Routers Netgear DC112A
Routers Netgear NTGWGR614 User Manual
(146 pages)
(146 pages)
Routers Netgear CA 95054 User Manual
(46 pages)
(46 pages)
Routers Netgear DG814 User Manual
(16 pages)
(16 pages)
Routers Netgear WND930 User Manual
(67 pages)
(67 pages)
Routers Netgear DGND3300 User Manual
(118 pages)
(118 pages)
Routers Netgear WNHDE111 User Manual
(82 pages)
(82 pages)
Routers Netgear RANGEMAX WPN111 User Manual
(87 pages)
(87 pages)
Routers Netgear WNDA3100v3 User's Guide
(28 pages)
(28 pages)
Routers Netgear DG814 DSL User Manual
(112 pages)
(112 pages)
Routers Netgear WPN824 User Manual
(174 pages)
(174 pages)
Routers Netgear WNR834B User Manual
(128 pages)
(128 pages)
Routers Netgear WNDA3100v2 User's Guide
(60 pages)
(60 pages)
Routers Netgear NTV300S Installation Guide
(16 pages)
(16 pages)
Routers Netgear WN511T User Manual
(42 pages)
(42 pages)
Routers Netgear MVBR1210C User's Guide
(116 pages)
(116 pages)
Routers Netgear WNDR37AV User Manual
(2 pages)
(2 pages)
Routers Netgear WNA1000Mv2 Datasheet
(3 pages)
(3 pages)
(20 pages)
Routers Netgear ROUTER WGT624 User Manual
(98 pages)
(98 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
© 2020, manymanuals.com. All rights reserved. | 0.266 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals