Netgear DC112A User's Guide download pdf (Page 59)

Control Internet Access

AirCard Smart Cradle

10. In the Triggering Port field, enter the number of the outbound traffic port that will open the

inbound ports.

11. Complete the Connection T

ype, Starting Port, and Ending Port fields.

12. Click the Apply button.

The service is now in the Portmap table. You must enable port triggering before the

cradle uses port triggering. See Enable Port Triggering on page 59.

Enable Port Triggering

 To enable port triggering:

1. Launch a web browser from a computer or wireless device that is connected to the

Smart Cradle.

2. In the address field of the browser

, enter http://netgear.cradle or http://192.168.100.1.

A login prompt displays.

3. Enter the cradle user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > Port Forwarding/Port Triggering.

The Port Forwarding/Port Triggering screen displays.

5. Select the Port T

riggering radio button.

6. Clear the Disable Port Triggering check box.

If this check box is selected, the cradle does not use port triggering even if you use

specified port triggering settings.

7. In the Port T

riggering Timeout field, enter a value up to 9999 minutes.

This value controls how long the inbound ports stay open when the cradle detects no

activity

. This value is required because the cradle cannot detect when the application

terminates.

1 ... 58 59 60 ... 156

No comments

Netgear DC112A User's Guide Page 59