Netgear DC112A User's Guide download pdf (Page 110)

Manage the AirCard Smart Cradle

110

AirCard Smart Cradle

2. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.

A login prompt displays.

3. Enter the cradle user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select Advanced >

Administration > Remote Management.

5. Select the Turn Remote Management On check box.

6. In the

Allow Remote Access By section, specify the external IP addresses to be allowed to

access the cradle’s web management interface remotely.

Note: For enhanced security, restrict access to as few external IP addresses

as practical.

Select one of the following:

• Only This Computer.

Allow access from a single IP address on the Internet. Enter

the IP address to be allowed access.

• IP Address

Range. Allow access from a range of IP addresses on the Internet. Enter

a beginning IP address and an ending IP address to define the allowed range.

• Everyone.

Allow access from any IP address on the Internet.

7. Specify the port number for accessing the web management interface.

Normal web browser access uses the standard HTTP service port 80. For greater

security

, enter a custom port number for the remote web management interface. Choose

a number from 1024 to 65535, but do not use the number of any common service port.

The default is 8080, which is a common alternate for HTTP.

8. Click the Apply button.

Your changes take effect.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 155 156

No comments

Netgear DC112A User's Guide Page 110