Netgear XAV1601 User Manual download pdf (Page 7)

Chapter 1. Installation and Basic Configuration | 7

XAV1601 Powerline AV+ 200 Nano User Manual

Installing Your Powerline XAV1601 Nano

Prepare for Installation:

1. Before you begin, verify the following:

• Your Ethernet network is set up.

• An Ethernet port is available on your router.

• Your Internet connection is working.

• An Ethernet port is available on each computer that will use a Powerline XAV1601

Nano and is configured to work on your network. Usually, the default configuration

settings (TCP/IP and DHCP) are fine.

2. Familiarize yourself with the Powerline XAV1601 Nano.

The front panel has three lights: Power, Powerline, and Ethernet. The side panel has a

Security button, and a Reset button. The Ethernet port is located on the bottom of the

adapter. See Figure 2 on page 5.

3. Plan the location of your Powerline devices:

• Use an electrical outlet that is not controlled by a wall

switch to avoid someone

unknowingly turning off the

power to the outlet.

• Do not connect the Powerline XAV1601 Nano to a

power strip, extension cord, or surge protector as this

might prevent it from working correctly, or reduce the

network performance.

• Avoid using the Powerline XAV1601 Nano in an

electrical outlet that is located near an appliance that

uses a lot of power, such as a washer or dryer, or a

refrigerator. This could potentially prevent the adapter

from working correctly, or reduce network

performance.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Netgear XAV1601 User Manual Page 7