Netgear XAV1601 User Manual download pdf (Page 26)

26 | Appendix A. Supplemental Information

XAV1601 Powerline AV+ 200 Nano User Manual

• To help avoid damaging your system, be sure that the voltage selection switch (if

provided) on the power supply is set to match the power available at your location:

• 110 volts (V), 60 hertz (Hz) in most of North and South America and some Far

Eastern countries such as South Korea and Taiwan.

• 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan.

• 230 V, 50 Hz in most of Europe, the Middle East, and the Far East.

• Be sure that attached devices are electrically rated to operate with the power available in

your location.

• To help prevent electric shock, plug the system and peripheral power cables into properly

grounded electrical outlets.

• Use only approved power cables. If you have not been provided with a power cable for

your system or for any AC powered option intended for your system, purchase a power

cable that is approved for use in your country. The power cable must be rated for the

product and for the voltage and current marked on the product’s electrical ratings label.

The voltage and current rating of the cable should be greater than the ratings marked on

the product.

• The peripheral power cables are equipped with three-prong plugs to help ensure proper

grounding. Do not use adapter plugs or remove the grounding prong from a cable.

• Observe extension cable and power strip ratings. Make sure that the total ampere rating

of all products plugged into the extension cable or power strip does not exceed 80

percent of the ampere ratings limit for the extension cable or power strip.

• To help protect your system from sudden, transient increases and decreases in electrical

power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

• Position system cables and power cables carefully; route cables so that they cannot be

stepped on or tripped over. Be sure that nothing rests on any cables.

• Do not modify power cables or plugs. Consult a licensed electrician or your power

company for site modifications.

• Always follow your local and national wiring rules.

• Move products with care; ensure that all casters and stabilizers are firmly connected to

the system. Avoid sudden stops and uneven surfaces.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Netgear XAV1601 User Manual Page 26