Netgear XAV1601 User Manual download pdf (Page 11)

Chapter 1. Installation and Basic Configuration | 11

XAV1601 Powerline AV+ 200 Nano User Manual

2. On the first Powerline XAV1601 Nano, press its Security button for 2 seconds.

The power LED starts blinking after you release the button.

The adapter automatically produces a new, randomly generated network encryption key

that each Powerline XAV1601 Nano will use.

At this point, the other adapters in your network cannot communicate with each other.

3. Within 2 minutes of pressing the Security button on the first adapter, press the Security

button on the second adapter for 2 seconds.

In order to pair the devices, both buttons must be pressed within 2 minutes.

This securely configures your Powerline network with the same network encryption key.

4. If your network has more than 2 adapters, press the Security button on the additional

adapter for 2 seconds, then push the Security button on any additional adapters in your

existing network for 2 seconds. Both buttons must be pressed within 2 minutes. The

adapters retain security settings even if they are unplugged.

Note: An adapter can generate a private encryption key only once. To start

over, first reset the adapter back to its factory defaults, then follow

the previous procedure. See

Reset a Device to Factory Settings on

page 18.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Netgear XAV1601 User Manual Page 11