Installation GuidePowerline Ethernet AdapterMODEL XE602XE602 Qcard 5/7/02 10:23 AM Page 1
Connecting the Powerline Adapter to a PC1. Connect the enclosed standard (BLUE) Ethernet Cable to the Ethernet port of thePowerline Adapter.2. Connec
Check the SetupThe Power light should light up. The Ethernet Link LED icon should light up as long as the device on the other end of theCable (router
Setting Up Your Encryption Software(optional)The NETGEAR Powerline products provide the option to set your own unique encryption key.The encryption ke
5. Once all of the appropriate files have been copied to your hard drive, the following dialogbox will appear. Click "Finish".6. In order to
8. Once the following screen appears, click "Next"9. Enter a new password between 4-24 characters in length. Record the password on thefollo
10. Once the following dialog box appears, click on “Next” to begin reprogramming theXE602 with the new encryption password.11. Click on “Next” again
Troubleshooting Problem Cause Solution14Ethernet Link LED isOFF or intermittentNormal/Uplinkpush button isin the wrongposition• Make sure the power co
Technical Specifications 15One 10 Base-T Ethernet port One 14 Mbps PowerLine Ethernet portRJ-45 (10 Base-T Ethernet),Electrical Plug (PowerLine Ethern
Voluntary Control Council for Interference (VCCI) StatementThis equipment is in the second category (information equipment to be used in residential a
Technical SupportYOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAINPROOF OF PURCHASE AND THE WARRANTY INFORMATION. To register your product,
Introduction Thank you for purchasing the NETGEAR®XE602 Powerline Ethernet Adapter. ThisPowerline adapter lets you completely network your home by sim
Installation Overview Estimated setup time is 10 to 20 minutes for each PC. 1. Unpack the box and verify the contents.2. Connect the Ethernet port to
Unpack the BoxWhen you open the box, verify that you have received everything.The package includes:• XE602 Powerline Ethernet Adapter• Resource CD• 10
Prepare to Install the PowerlineEthernet Adapter The NETGEAR Powerline Ethernet adapter enables you to set up a home network using yourexisting electr
For each Room that you want a PC to connect to the network, you will need: • A XE602 Powerline Ethernet Adapter, if the PC has an existing Ethernet po
Install the XE602 Ethernet Adapter andConnect the Other Devices After unpacking the box, you are ready to install the Powerline adapter.Decide where y
Connecting the Powerline Adapter to a Cable/DSL routerIf you have a Cable/DSL router to share your Internet connection, you can extend thatconnection
Comments to this Manuals