Netgear NTV550 User's Guide download pdf (Page 8)

8 | Chapter 1. Getting Started

NTV550 Ultimate HD Media Player User Manual

Cabling the Ultimate HD Media Player

The installation guide that came in the package explains how to install your product. Cabling

for a typical installation with an Ethernet network connection is shown in the following figure.

Router

HDMI cable (not included)

AV output

NTV550

Ethernet cable

Figure 2. Ethernet connection

To connect wirelessly to your home router, you need the NETGEAR Universal Wi-Fi Internet

adapter WNCE2001 (sold separately). If you want to use a Powerline connection, you can

use the NETGEAR Home Theater Internet Connection Kit XAVB1004 (sold separately).

Tips

• The quality of the picture display is related to the video format you use. If your television

supports multiple formats, choose the format that provides the best picture quality. HDMI

offers the best picture quality video. Component video provides the next best quality,

followed by composite video.

• Optimize the television display as necessary.

- If the display is not sharp, or you do not see a picture, aim the NETGEAR remote

control at the Ultimate HD Media Player, and press the TV Mode button. Then cycle

through the TV modes to get the best display.

- It can take 5 to 10 seconds for each TV mode change. In some modes you might not

see a picture on the TV. If you do not see a picture after four mode changes, check

the cable connections, and verify that the TV is on and set to the correct input.

- You might be able to enhance the picture quality by selecting from additional

high-definition video modes in the advanced settings.

- Use the TV Mode button to cycle between PAL (50 Hz, European) and NTSC (60 Hz,

United States) display modes.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

No comments

Netgear NTV550 User's Guide Page 8