Netgear AirCard 875 (all others) User's Guide download pdf (Page 53)

Modem Status, Customization, and Reset Commands

Rev 2.8.1 Feb.11 53

!TIME=<YYYY>, <MM>,

[, <TZ>, <DST>]

!TIME?

!TIME=?

Supporting modems:

• All

Queries / sets current time of day

This command is used to set and retrieve the current time of day—the time of

day can be set using this command, or could be set by the network. If the

time has not been set, the command returns ERROR.

Usage:

• AT!TIME= <YYYY>,<MM>,<DD>,<hh>,<mm>,<ss> [, <TZ>, <DST>] sets

the current time.

• AT!TIME? returns four lines of data. Lines 1-2 show local date and time,

lines 3-4 show UTC date and time. Date format is YYYY/MM/DD; time

format is hh:mm:ss.

Example response:

!TIME:

2007/10/21

10:23:38 (local)

2007/10/21

17:23:38 (UTC)

OK

Note: In this example, <tz> is -32 (-8 hours) and DST is 1 (+1 hour).

• AT!TIME=? reports the format used for AT!TIME

Parameters:

<YYYY> – year

• 4 digits required

<MM> – month

• Valid values: 01–12

<DD> – day

• Valid values: 01–31

<hh> – hour

• Valid values: 00-23

<mm> – minute

• Valid values: 00–59

<ss> – second

• Valid values: 00–59

<TZ> – time zone offset from UTC in 15-minute increments

• Valid values: -48 to 48

• <DST> must also be set if <TZ> is used

<DST> – Daylight Saving Time offset in 1-hour increments

• Valid values: 0 to 2

• <TZ> must also be set if <DST> is used

Table 3-2: Modem status, customization, and reset commands (Continued)

Command Description

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

Comments to this Manuals

No comments

Netgear AirCard 875 (all others) User's Guide Page 53

Comments to this Manuals

Related products and manuals for Cellular wireless network equipment Netgear AirCard 875 (all others)