6
Rev 2.8.1 Feb.11 63
6: Memory Management
Commands
Introduction
Themodemhas2MBofnon‐volatilememorythatisusedto
store:
• Factorycalibrationdata
• Settingsmadeinahostapplication suchasWatcher
Thecommandsinthischapterallowyoutobackupand
restorethedatainnon‐volatilememory.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter:
Command reference
Table 6-1: Memory management command passwords
Command Description Page
!NVBACKUP Backs up items stored in non-volatile memory 63
Table 6-2: Memory management command details
Command Description
!NVBACKUP
=<category>
Supporting modems:
• All
Backs up items stored in non-volatile memory
This command creates a backup that is stored in the modem’s flash memory.
Parameters:
<category> (specify items to back up):
• 0 = Factory items (RF calibration data) — Used only at the factory (only
needs to be done once for the lifetime of the device)
• 1 = OEM items (PRI customizations) — Used only by the OEM when loading
a new PRI configuration (only needs to be done once for the lifetime of the
device)
• 2 = User items (customizations, including those made by Watcher or other
host applications) — This is the only backup option that should be employed
by users. Use this command before doing a firmware update. If the
modem’s file system is reinitialized for some reason during the update, the
customizations would then be automatically restored using from the backed-
up information.
The command returns:
• NV Items saved
• NV Items skipped
The ‘items skipped’ represent memory to which nothing has been written.
Comments to this Manuals