Supported AT Command Reference
54 2130617
!UDINFO?
Supporting modems:
• All
Returns information from active USB descriptor
This command returns information from the active USB descriptor in the
format <vid> <pid> <manuf string> <product string> (each parameter on a
separate line).
Parameters:
<vid> – Vendor ID
• Valid range: 0000–FFFF
<pid> – Product ID
• Valid range: 0000–FFFF
<manuf string> – Manufacturer string
• ASCII string (29 characters maximum)
• Example: “Sierra Wireless, Incorporated”
<product string> – Product string
• ASCII string (64 characters maximum)
• Example: “Mini Card”
+UPSC
Supporting modems:
• All
Displays Primary Scrambling Code (WCDMA only)
This command displays the Primary Scrambling Code (PSC) of the reference
WCDMA cell.
Example:
AT!UPSC returns:
+UPSC: <psc>
Parameters:
<psc> – Primary Scrambling Code of reference WCDMA cell
• Valid range: 0-255
• 255 = No valid cell
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Comments to this Manuals