Netgear AirCard 875 (all others) User's Guide download pdf (Page 27)

Rev 2.8.1 Feb.11 27

3: Modem Status, Customization,

and Reset Commands

• Introduction

• Command summary

• Command reference Introduction

Thischapterdescribescommandsusedtoresetthemodem,

adjustcustomizationsettings,retrievethefirmwareversion,

andmonitorthetemperature,voltage,andmodemstatus.

Command summary

Thetablebelowliststhecommandsdescribedinthischapter.

Table 3-1: Modem status commands

Command Description Page

!BAND Selects a set of frequency bands / queries current selection 29

!BCINF Returns the bootloader version 30

!BOOTHOLD Resets modem and waits in bootloader for firmware download 30

^CARDMODE Returns SIM card mode (card type) 30

+CLVL Sets / returns internal loudspeaker volume 31

+CMUT Enables / disables uplink voice muting 31

!CNTI Returns current, available, and supported network technologies 31

+CQI Returns or enables / disables return of averaged CQI (Channel

Quality Indicator) value (WCDMA only)

+CSDONSIO2 Configures secondary SIO port for circuit-switched data 32

+ECIO Returns total Energy per chip per power density value

(WCDMA only)

+ETFCI Enable / disable / query E-TFCI average value 33

!GCIPHER Returns operational status 38

!GETBAND Returns the current active band 34

!GETRAT Returns the current active radio access technology (RAT) 34

!GRELIMEI Returns the modem’s production TAC 35

!GRESET Resets the modem 35

!GSMINFO Displays 2G network information 36

!GSTATUS Returns operational status 38

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

No comments

Netgear AirCard 875 (all others) User's Guide Page 27