Netgear AirCard 875 (all others) User's Guide download pdf (Page 19)

Supported GSM / WCDMA AT Commands

Rev 2.8.1 Feb.11 19

S10 Set disconnect delay after indicating the absence of data carrier Yes

S3 Set command line termination character Yes

S4 Set response formatting character Yes

S5 Set command line editing character Yes

S6 Set pause before blind dialing Yes

S7 Set number of seconds to wait for connection completion Yes

S8 Set number of seconds to wait when comma dial modifier used Yes

T Select tone dialing Yes

V Set result code format mode Yes

X Set connect result code format and call monitoring Yes

Z Set all current parameters to user-defined profile Yes

Table 2-2: Supported 27.005 AT commands

Command Description Supported

+CBM Cell broadcast message directly displayed Yes

+CBMI Cell broadcast message stored in memory at specified <index>

location

+CDS SMS status report after sending a SMS Yes

+CDSI Incoming SMS status report Yes

+CMGC Send command Yes

+CMGD Delete message Yes

+CMGF Message format Yes

+CMGL List messages Yes

+CMGR Read message Yes

+CMGS Send message Yes

+CMGW Write message to memory Yes

+CMMS More messages to send Yes

+CMNA New message acknowledgement to ME/TA Yes

+CMS ERROR:

<err>

SMS error (mobile or network error) Yes

+CMSS Send message from storage Yes

Table 2-1: Supported ITU-T Recommendation V.250 AT commands (Continued)

Command Description Supported

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

No comments

Netgear AirCard 875 (all others) User's Guide Page 19