Netgear R6300 User Manual download pdf (Page 91)

Advanced Settings

R6300v2 Smart WiFi Router

Advanced Wireless Settings

You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use

AP mode, and to set up a wireless access list.

The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen

are reserved for wireless testing and advanced configuration only. Do not change these

settings unless you have a specific reason to do so.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the router. You

can turn the wireless radio on or off in the Advanced Wireless Settings screen or by using the

WiFi On/Off button on the router side panel. When the wireless radio is off, you can still use

an Ethernet cable for a LAN connection to the router.

 To turn the wireless radio on or off:

1. Select ADV

ANCED > Advanced Setup > Wireless Settings.

By default, the Enable Wireless Router Radio check box is selected.

2. Select or clear the Enable W

ireless Router Radio check box.

Clearing this check box turns off the WiFi feature of the wireless router.

3. (Optional) Select the T

urn off wireless signal by schedule check box and fill in the fields

to specify the times when you do not need a wireless connection.

For example, you could turn off the wireless signal for the weekend if you leave town.

4. Click the Apply button.

Your changes take effect.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 132 133

No comments

Netgear R6300 User Manual Page 91