Netgear R6300 User Manual download pdf (Page 100)

Advanced Settings

100

R6300v2 Smart WiFi Router

6. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access

points that should function as repeaters.

If your router is the base station, it can function as the “parent” for up to four other access

points.

7. Click the Apply button.

Your changes are saved.

Set Up a Repeater

To avoid conflicts with the wireless connection to the base station, uUse a wired Ethernet

connection to set up the repeater unit.

Note: If you are using the router as the base station with a non-NETGEAR

router as the repeater, you might need to change more configuration

settings. In particular, you should disable the DHCP server function

on the access point that is the repeater.

 To configure the router as a repeater:

1. Log in to the router that will be the repeater

2. Select BASIC > W

ireless Settings and verify that the wireless settings match the base unit

exactly.

The wireless security option has to be set to WEP or None.

3. Select ADV

ANCED > Wireless Repeating Function.

4. Select the Enable W

ireless Repeating Function check box.

5. Select the W

ireless Repeater radio button.

6. Fill in the Repeater IP Address field.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 132 133

No comments

Netgear R6300 User Manual Page 100