Netgear MBR1210 User's Guide download pdf (Page 90)

90 | Chapter 6. Troubleshooting

Mobile Broadband 11n Wireless Router MBR1210 User Manual

Problems with Date and Time

The email screen displays the current date and time of day. The Mobile Broadband 11n

Wireless Router uses the Network Time Protocol (NTP) to obtain the current time from one of

several network time servers on the Internet. Each entry in the log is stamped with the date

and time of day. Problems with the date and time function can include the following:

• Date shown is January 1, 2000.

Cause: The router has not yet successfully reached a network time server. Check that

your Internet access settings are configured correctly. If you have just completed

configuring the router, wait at least 5 minutes, and check the date and time again.

• Time is off by one hour.

Cause: The router does not automatically sense daylight savings time. On the E-mail

screen, select or clear the Adjust for Daylight Savings Time check box.

Restoring the Default Configuration and Password

This section explains how to restore the factory default configuration settings, changing the

router’s admin password to password and the IP address to 192.168.0.1. You can erase the

current configuration and restore factory defaults in two ways:

• Use the Erase feature (see Erasing the Configuration on page 54).

• Press the Restore Factory Settings button on the bottom of the router for 6 seconds. Use

this method for cases when the administration password or IP address is not known.

The factory default settings are shown in Factory Default Settings in Appendix A.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 200 201

No comments

Netgear MBR1210 User's Guide Page 90