Netgear MBR1210 User's Guide download pdf (Page 61)

Chapter 5. Advanced | 61

Mobile Broadband 11n Wireless Router MBR1210 User Manual

Wireless Station Access Control

By default, any wireless PC configured with the correct SSID and wireless security settings is

allowed access to your wireless network. You can use wireless access point settings in the

Wireless Setting screen to further restrict wireless access to your network:

• Turn off wireless connectivity completely.

You can completely turn off the wireless portion of the router. For example, if you use

your notebook computer to wirelessly connect to your router, and you take a business

trip, you can turn off the wireless portion of the router while you are traveling. Other

members of your household who use computers connected to the router via Ethernet

cables can still use the router. To do this, clear the Enable Wireless Router Radio check

box on the Wireless Settings screen, and then click Apply.

• Hide your wireless network name (SSID).

By default, the router is set to broadcast its wireless network name (SSID). You can

restrict wireless access to your network by not broadcasting the wireless network name

(SSID). To do this, clear the Enable SSID Broadcast check box on the Wireless Settings

screen, and then click Apply. Wireless devices will not “see” your router. You must

configure your wireless devices to match the wireless network name (SSID) of the router.

Note: The SSID of any wireless access adapters must match the SSID

you configure in the router. If they do not match, you will not get a

wireless connection to the router.

Restricting Access by MAC Address

For increased security, you can restrict access to the wireless network to allow only specific

PCs based on their MAC addresses. You can restrict access to only trusted PCs so that

unknown PCs cannot wirelessly connect to the Mobile Broadband 11n Wireless Router. MAC

address filtering adds an obstacle against unwanted access to your network, but the data

broadcast over the wireless link is fully exposed.

Note: If you configure the router from a wireless computer, add your

computer’s MAC address to the access list. Otherwise you will lose

your wireless connection when you click Apply. You must then

access the router from a wired computer, or from a wireless

computer that is on the access control list, to make any further

changes.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 200 201

No comments

Netgear MBR1210 User's Guide Page 61