Netgear MBR1210 User's Guide download pdf (Page 60)

60 | Chapter 5. Advanced

Mobile Broadband 11n Wireless Router MBR1210 User Manual

Advanced Wireless Settings

From the main menu, select Advanced Wireless Settings to display the following screen:

Table 2.

Field Description

Enable Wireless Router Radio Selected by default, this setting enables the wireless radio, which

allows the router to work as a wireless access point.

Turning off the wireless radio can be helpful for configuration,

network tuning, or troubleshooting.

Fragmentation Length, CTS/RTS

Threshold, and Preamble Mode

These should be left at their default settings.

Router PIN The PIN number used for Push 'N' Connect.

Disable Router PIN By default, this check box is cleared. This allows the WPS clients to

discover the router’s PIN.

Keep Wireless Settings By default, this check box is cleared. This allows the router to

automatically generate the SSID and WPA/WPA2 security settings

when it implements WPS. After WPS is implemented, the router

automatically selects the Keep Existing Wireless Settings check

box so that your SSID and wireless security settings remain the

same if other WPS-enabled devices are added later.

Turn Access Control On Access control is disabled by default so that any computer

configured with the correct SSID can connect. See Restricting

Access by MAC Address on page 62.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 200 201

No comments

Netgear MBR1210 User's Guide Page 60