Netgear MBR1210 User's Guide download pdf (Page 32)

32 | Chapter 2. Wireless Network Configuration

Mobile Broadband 11n Wireless Router MBR1210 User Manual

The router WPS screen displays a

message confirming that the client was

added to the wireless network. The router

generates an SSID, and implements

WPA/WPA2 wireless security. The router

will keep these wireless settings unless

you change them, or you clear the Keep

Existing Wireless Settings check box in

the Advanced Wireless Settings/WPS

Settings screen.

6. Note the new SSID and WPA/WPA2

password for the wireless network. You can

view these settings in the Wireless Settings

screen. See Manually Configure Your

Wireless Settings on page 28.

To access the Internet from any computer connected to your router, launch a browser such

as Microsoft Internet Explorer or Mozilla Firefox. You should see the router’s Internet LED

blink, indicating communication to the ISP.

Note: If no WPS-capable client devices are located during the 2-minute

time frame, the SSID does not change, and no security is set up.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 200 201

No comments

Netgear MBR1210 User's Guide Page 32