Netgear DG834GUV5 User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
DG834GUv5 Wireless Router with Built-in DSL Modem User Manual
2-12 Configuring Your Wireless Network and Security Settings
v1.0, May 2009
wireless security. The modem router will keep these wireless settings unless you change them,
or you clear the Keep Existing Wireless Settings check box in the WPS Settings screen.
6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See “Using Push 'N' Connect (WPS) to Configure
Your Wireless Network” on page 2-10.
To access the Internet from any computer connected to your modem router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the modem router’s Internet
LED blink, indicating communication to the ISP.
Using PIN Entry to Add a WPS Client
Any wireless computer or wireless adapter that will connect to the modem router wirelessly is a
client. The client must support a WPS PIN, and must have a WPS configuration utility, such as the
NETGEAR Smart Wizard or Atheros Jumpstart.
The first time you add a WPS client, make sure that the Keep Existing Wireless Settings check
box on the WPS Settings screen is cleared. This is the default setting for the modem router, and
allows it to generate the SSID and WPA/WPA2 security settings when it implements WPS. After
WPS is implemented, the modem router automatically selects this check box so that your SSID
and wireless security settings remain the same if other WPS-enabled devices are added later.
To use a PIN to add a WPS client:
1. Log in to the modem router at its default LAN address of http://10.0.0.2 with its default user
name of admin and default password of admin, or using whatever LAN address and password
you have set up.
Figure 2-5
Note: If no WPS-capable client devices are located during the 2-minute timeframe, the
SSID will not be changed, and no security will be implemented on the modem
router.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 119 120

Comments to this Manuals

No comments