Netgear WNDAP350 User's Guide download pdf (Page 57)

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual

Basic Installation and Configuration 2-35

v2.0, April 2013

5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless

clients will not be able to communicate with each other. (This feature is intended for hotspots

and other public access situations.

6. Click Apply to save your settings.

Configuring WPA with RADIUS

Not all wireless adapters support WPA. Furthermore, client software is required on the client.

Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that

supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions

on configuring WPA settings.

To configure WPA, follow these steps:

1. Under the Configuration tab, select Security on the main menu, select

Advanced from the

left-hand menu, and then select RADIUS Server Settings. The RADIUS Server Settings

screen displays.

2. Enter the RADIUS Server Settings as shown in “Configuring the RADIUS Server Settings” on

page 2-29.

3. Click Apply to save your RADIUS Server settings.

Note: If you use a wireless computer to configure WEP settings, you will be

disconnected when you click Apply. Reconfigure your wireless adapter to match

the new settings or access the wireless access point from a wired computer to

make any further changes.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 137 138

No comments

Netgear WNDAP350 User's Guide Page 57