Netgear WNDAP330 User's Guide Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-30 Basic Installation and Configuration
v1.0, May 2008
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 2-36, “Configuring WPA2 with RADIUS” on
page 2-37, or “Configuring WPA and WPA2 with RADIUS” on page 2-38 for specifics on
implementing these security options).
To set up or modify the RADIUS Server Settings:
1. From your Web browser, log in to the WNDAP330 using the default LAN address of
http://192.168.0.235, user name admin and password password, or use the LAN address and
password that you set up.
2. Under the Configuration tab, select Security on the main menu, select Advanced from the left-
hand menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
will display, as shown in
Figure 2-14.
Note: The RADIUS Server Settings apply to all profiles. They only need to be configured
once per wireless access point.
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 141 142

Comments to this Manuals

No comments