Netgear WNDAP330 User's Guide Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-6 Management
v1.0, May 2008
The Web browser used to upload new firmware into the WNDAP330 must support HTTP uploads,
such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above.
To upgrade the WNDAP330 firmware:
1. Download the new software file from the NETGEAR website, save it to your hard disk, and
unzip it.
2. Under the Maintenance tab, select Upgrade from the main menu, and then select Firmware
Upgrade. The Firmware Upgrade screen will display as shown in
Figure 3-4.
3. Click Browse and browse to the location of the image (.RMG) upgrade file.
4. Click Apply.
When the upload completes, your wireless access point will automatically restart. The upgrade
process typically takes about 1 minute and 30 seconds.
Figure 3-4
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 141 142

Comments to this Manuals

No comments