Netgear WNDAP330 User's Guide Page 107

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 106
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Advanced Configuration 4-15
v1.0, May 2008
3. Configure the WNDAP330 (AP2) on LAN Segment 2 in Point-to-Point Bridge mode.
AP1 must have AP2’s MAC address in its Remote MAC Address field and AP2 must have
AP1’s MAC address in its Remote MAC Address field.
4. Configure and verify the following parameters for both access points:
Verify that the LAN network configuration of the WNDAP330 Wireless Access Points
both are configured to operate in the same LAN network address range as the LAN
devices
Both use the same ESSID, Channel, authentication mode, if any, and security settings if
security is in use.
Figure 4-8
Page view 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Comments to this Manuals

No comments