Netgear WC7600 Installation Guide download pdf (Page 15)

• You might not have restarted the computer with the wireless

controller to have TCP/IP changes take effect. Restart the

computer.

• The computer might be set to enable NetBIOS over TCP/IP.

Check that TCP/IP is set to use a static IP address of

192.168.0.210 and a subnet mask of 255.255.255.0. (The default

TCP/IP setting for Windows is to obtain an IP address

automatically.) Restart the computer.

After initial configuration, you cannot access the wireless controller at

its network address. Do the following:

• Use the ping command to verify the connection.

• Verify that the computer and wireless controller are on the same

VLAN.

• Some of the wireless controller’s default settings might not work

with your network. Check the wireless controller’s default settings

against the configuration of other devices in your network.

1 2 ... 10 11 12 13 14 15 16

No comments

Netgear WC7600 Installation Guide Page 15