Netgear WC7600 Installation Guide download pdf (Page 14)

3. Follow the steps onscreen to discover the access points and review

the discovery results.

4. Select Access Point > Discovery > Managed AP List. Add the

access points that you want to be managed by the wireless

controller to the Managed AP List.

While the access points are converted from standalone mode to

managed mode, the following occurs:

• The wireless controller pushes management firmware onto the

access points.

• The access points become DHCP clients and receive an IP

address from either the DHCP server in your network or the

DHCP server on the wireless controller.

• The profiles that you have configured on the wireless controller

are pushed onto the access points.

Note: For extensive information about the Discovery Wizard and the

discovery process, see the reference manual.

Troubleshooting Tips

You cannot access the wireless controller at its default IP address

(192.168.0.250). Do the following:

• Confirm that the computer is connected to the wireless controller.

1 2 ... 9 10 11 12 13 14 15 16

No comments

Netgear WC7600 Installation Guide Page 14