ProSAFE Wireless Controller WC7600
1013. Select Configuration > System > DHCP Server. The Discovery Wizard (see Discover Access Points) requires a DHCP server to discover the acce
11b. Configure one or more profile groups, each with one or more profiles that have their own SSID and security settings.c. Click the Apply button. No
12Discover Access PointsThe wireless controller manages selected NETGEAR access points. For a list of supported NETGEAR access points, visit the NETGE
13The Discovery Wizard can discover access points that are either in factory default state or already deployed and running. For the Discovery Wizard t
143. Follow the steps onscreen to discover the access points and review the discovery results.4. Select Access Point > Discovery > Managed AP Li
15• You might not have restarted the computer with the wireless controller to have TCP/IP changes take effect. Restart the computer.• The computer mig
SupportThank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to reg
2Package ContentsThe package contains the following items:• ProSAFE® Wireless Controller WC7600• AC power cable• Straight-through Category 5 Ethernet
3Meet Your Wireless ControllerBefore you install your wireless controller, familiarize yourself with its LEDs, buttons, and ports.Front PanelConsole 9
4Rear PanelPower inputPower Status LED
5Set Up the Wireless Controller To set up the wireless controller:1. Configure your computer with a static IP address of 192.168.0.210 and a subnet m
6Fan The green Fan LED is lit, indicating that the fans are functioning correctly.EthernetportThe right Ethernet port LED is lit green for a 1000 Mbps
7Access the Wireless Controller To access the wireless controller:1. On your computer, open a browser. In the address field, type http://192.168.0.25
8The wireless controller’s web management interface displays.Configure the Basic Settings To configure the basic settings:1. From the main navigation
96. Select the time zone in which the wireless controller is used. 7. (Optional) Configure the NTP settings. 8. Click the Apply button.9. Select Confi
Comments to this Manuals