Netgear ME101 User Manual download pdf (Page 14)

Configuring the bridge settings:

1. Type http:// and the IP address of

the bridge (the default is

192.168.0.200) as the Web address

in the browser and press Return.

You’ll see the Information page.

2. To change the SSID for the bridge

to connect to, click Wireless

Settings.

3. Type admin as the User ID and

type password as the Password.

4. Click OK.

5. Type the SSID of the wireless

router or access point.

6. If you’re not in the United States, select the correct country or region from the

Country/Region list. Click Yes to accept the new country or region.

Warning: Having the bridge set to the wrong country or region may result in the violation

of local laws.

7. Click Apply.

8. If you’re through making changes, click Logout.

9. To use the bridge with a different Ethernet-enabled device, see

Installing the ME101 on

page 4 to connect the bridge.

Changing the password:

1. Start your browser software.

2. Type http:// followed by the IP

address for the bridge (the default

is 192.168.0.200) as the Web

address and press Return.

You’ll see the Information page.

3. To change the password, click

Change Password.

4. Type admin as the User ID and

type the current password

(password is the default) as the

Password.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

No comments

Netgear ME101 User Manual Page 14