Netgear ME101 User Manual download pdf (Page 7)

4. Turn off the gaming console or other Ethernet-enabled device.

5 Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming

console or other Ethernet-enabled device.

Note: The ME101 Wireless Bridge should be connected to one device only. Don’t connect

it through a network switch or hub.

6. Connect the power adapter to the wireless bridge and plug the power adapter in to a

power outlet. The Power and Wireless LAN lights should light up.

7. After you see the Wireless LAN light light up, turn on the gaming console or other

Ethernet-enabled device.

If the bridge and the Ethernet-enabled device are successfully connected, the Network

light will light up. This light flashes when there is network activity.

Note: If your setup works with the default settings, you don’t need to install the software

from the provided CD to configure the bridge unless you need to change the

Country/Region setting from the default setting (U.S.A.).

Default Ethernet AntennaDC in 5V

Gaming console or other

Ethernet-enabled device

ME101 Wireless

Ethernet Bridge

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

No comments

Netgear ME101 User Manual Page 7