Netgear MBRN3000 User Manual download pdf (Page 42)

Chapter 4: Managing Your Network | 41

Mobile Broadband Wireless-N Router MBRN3000

• Display the routing table to identify what other routers the router is communicating with.

• Reboot the router to enable new network configurations to take effect or to clear problems

with the router’s network connection.

From the main menu, under the Maintenance heading, select Diagnostics:

• Ping: Ping an IP address.

• Lookup: A DNS (Domain Name Server) converts the Internet name such as

www.netgear.com to an IP address. If you need the IP address of a server on the Internet,

you can do a DNS lookup to find the IP address.

• Display: View the internal routing table. Typically, this information is used only by

Technical Support.

• Reboot: Shut down and restart the router.

Note: If you reboot the router you will lose your connection. To access the

router you will need to log in again after it has finished rebooting.

• Save: Save diagnostic information.

• Scan:

Enabling Remote Management

Using the Remote Management screen, you can allow a user or users on the Internet to

configure, upgrade, and check the status of your router.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 72 73

No comments

Netgear MBRN3000 User Manual Page 42