Netgear MBRN3000 User Manual download pdf (Page 35)

34 | Chapter 4: Managing Your Network

Mobile Broadband Wireless-N Router MBRN3000

WAN Port Connection Status The status of the Internet connection.

IP Address The IP address used by the modem. If no address is shown,

the router cannot connect to the Internet.

Protocol The protocol for the Internet connection, which is PPP

(Point-to-Point).

IP Subnet Mask The IP subnet mask used by the router’s USB port.

Gateway IP Address The IP address used by the router.

Domain Name

Server

The DNS server IP addresses used by the router. These

addresses are usually obtained dynamically from the ISP.

LAN Port MAC Address The Ethernet MAC address used by the router’s LAN port.

IP Address The LAN port IP address. The default is 192.168.0.1.

DHCP

• Off: The router will not assign IP addresses to PCs on the

LAN.

• On: The router assigns IP addresses to PCs on the LAN.

IP Subnet Mask The LAN port IP subnet mask. The default is 255.255.255.0.

Wireless Port

(See “Manually

Configuring Your

Wireless Settings”

on page 15.

Name (SSID) The service set ID, also known as the wireless network name.

Region The country where the unit is set up for use.

Channel The current channel, which determines the operating

frequency.

Wireless AP Indicates if the access point feature is disabled or not. If not

enabled, the Wireless LED on the front panel will be off.

Broadcast Name Indicates if the router is configured to broadcast its SSID.

Table 4. Router Status Fields (Continued)

Field Description

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 72 73

No comments

Netgear MBRN3000 User Manual Page 35