Netgear WPNT834 User Manual download pdf (Page 28)

Reference Manual for the RangeMax 240 Wireless Router WPNT834

3-4 Connecting the Router to the Internet

v1.0, November 2005

Troubleshooting Tips

Here are some tips for correcting simple problems you may have:

Be sure to restart your network in this sequence:

1) Turn off the modem, wireless router, and computer; 2) Turn on the modem, wait two

minutes; 3) Turn on the wireless router and wait 1 minute; 4) Turn on the computer.

Make sure the Ethernet cables are securely plugged in.

• The Internet status light on the wireless router will be lit if the Ethernet cable to the wireless

router from the modem is plugged in securely and the modem and wireless router are turned

on.

• For each powered on computer connected to the wireless router with a securely plugged in

Ethernet cable, the corresponding wireless router LAN port status light will be lit. The label on

the bottom of the wireless router identifies the number of each LAN port.

Make sure the wireless settings in the computer and router match exactly.

The Wireless Network Name (SSID) and WEP or WPA security settings of the router and

wireless computer must match exactly.

Make sure the network settings of the computer are correct.

• LAN and wirelessly connected computers must be configured to obtain an IP address

automatically via DHCP. Please see “Preparing a Computer for Network Access” in

Appendix B or the animated tutorials on the CD for help with this.

• Some cable modem ISPs require you to use the MAC address of the computer registered on

the account. If so, in the Router MAC Address section of the Basic Settings menu, select Use

this Computer’s MAC Address. The router will then capture and use the MAC address of the

computer that you are now using. You must be using the computer that is registered with the

ISP. Click Apply to save your settings. Restart the network in the correct sequence.

Check the router status lights to verify correct router operation.

• If the Power light does not turn solid green within 2 minutes after turning the router on, reset

the router according to the instructions in “Restoring the Default Configuration and Password”

on page 7-7.

• If the Wireless light does not come on, verify that the wireless feature is turned on according to

the instructions in “Understanding Wireless Settings” on page 4-3.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 106 107

No comments

Netgear WPNT834 User Manual Page 28