Netgear WND930 User Manual download pdf (Page 31)

Network Settings

Outdoor High Power Wireless N Access Point

Configure Advanced Wireless Settings

The default settings usually work well. However, you can adjust these settings to fine-tune

the performance of your access point for your environment.

 To configure advanced wireless settings:

1. L

aunch a web browser on the computer that is connected to the access point.

2. In the address

field of the browser, enter http://192.168.0.100.

A login prompt displays.

3. Ente

r the user name and password.

The user name is adm

in and the default password is password.

The General screen displays.

4. T

o configure the advanced wireless settings for the 2.4 GHz band, select Configuration >

Wireless > Advanced > Wireless Settings > 802.11b//jointfilesconvert/25162/bg/ng.

5. To change the settings, enter the appropriate information in the following fields:

• RTS Threshold

(0-2347). Request to Send threshold. The packet size that is used to

determine if the station should use the CSMA/CD (Carrier Sense Multiple Access with

Collision Detection) mechanism or the CSMA/CA (Carrier Sense Multiple

Access/Collision Avoidance) mechanism for packet transmission. The setting affects

the transmitting station as follows:

- With th

e CSMA/CD transmission mechanism, the transmitting station sends out

the actual packet until the silence period ends.

- With th

e CSMA/CA transmission mechanism, the transmitting station sends out

an RTS packet to the receiving station and waits for the receiving station to send

back a CTS (Clear to Send) packet before sending the actual packet data.

The default is 2347.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

No comments

Netgear WND930 User Manual Page 31