Netgear WND930 User Manual download pdf (Page 46)

Manage the Access Point

Outdoor High Power Wireless N Access Point

Set Up SNMP

Enable SNMP to allow the SNMP network management software, such as HP OpenView, to

manage the wireless access point by using the SNMPv1/v2 protocol.

 To set up SNMP:

1. Laun

ch a web browser on the computer that is connected to the access point.

2. In

the address field of the browser, enter http://192.168.0.100.

A login prompt displays.

3. Enter th

e user name and password.

The user name is ad

min and the default password is password.

The General screen displays.

4. Select Maintenance

> SNMP.

5. Leave the SNMP Enable radio button selected.

6. S

pecify the settings:

• Read-Only Commu

nity Name. The public community string to allow the SNMP

manager to read the wireless access point’s MIB objects.

• Read-W

rite Community Name. The private community string to allow the SNMP

manager to read and write the wireless access point’s MIB objects.

• T

rap Community Name. The community name that is associated with the IP address

to receive traps.

• IP Add

ress to Receive Traps. The IP address of the SNMP manager to receive traps

sent from the access point.

7. Click the Appl

y button at the bottom of the screen.

Your settings are saved.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 66 67

No comments

Netgear WND930 User Manual Page 46