Netgear WND930 User Manual download pdf (Page 12)

Initial Setup

Outdoor High Power Wireless N Access Point

This unique name is the access point NetBIOS name. The default access point name is

on the product label. The naming convention is netgearxxxxxx, where xxxxxxx represents

the last 6 digits of the access point MAC address. You can enter a unique name up to 15

characters long.

5. From t

he Country/Region list, select the region where the access point is located.

In the United States this setting cannot be changed. If your country or region is not listed,

che

ck with NETGEAR support for the correct selection.

6. Click the Appl

y button at the bottom of the screen.

Your settings are saved.

Set the Time

You must use a computer that is configured with a static IP address of 192.168.0.210 and a

subnet mask of 255.255.255.0. During initial setup, use a wired Ethernet connection from the

computer to the access point.

 To set the time:

1. Laun

ch a web browser on the computer that is connected to the access point.

2. In

the address field of the browser, enter http://192.168.0.100.

A login prompt displays.

3. Enter th

e user name and password.

The user name is ad

min and the default password is password. The user name and

password are case-sensitive.

The General screen displays.

4. Select Co

nfiguration > System > Basic > Time.

5. Adjust the following fields:

• T

ime Zone. Select the local time zone for your access point. The default is

USA-Pacific. The access point gets the current time from the connected computer.

• NTP Client. Enable

the NTP client to synchronize the time of the access point with an

NTP server. The Enable radio button is selected by default.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 66 67

No comments

Netgear WND930 User Manual Page 12