Netgear WND930 User Manual download pdf (Page 42)

Network Settings

Outdoor High Power Wireless N Access Point

• The wireless stations that you enable can connect to the access points. If you require

wireless stations to access any LAN segment, you can add additional access points

configured in wireless bridge mode to any LAN segment.

Disable Ethernet LLDP

By default, the access point is set up with Link Layer Discovery Protocol (LLDP) enabled.

LLDP is also known as 802.1ab (industry standard protocol). The LLDP provides an

inter-vendor-compatible mechanism to deliver Link Layer notifications to adjacent network

devices. LLDP application transmits only notifications but does not receive process

notifications and notifies if the device is running on PoE (measuring power utilization).

 To disable Ethernet LLDP:

1. Laun

ch a web browser on the computer that is connected to the access point.

2. In

the address field of the browser, enter http://192.168.0.100.

A login prompt displays.

3. Enter th

e user name and password.

The user name is ad

min and the default password is password.

The General screen displays.

4. Select Co

nfiguration > System > Advanced > Ethernet LLDP.

5. Select the Disable radio button.

6. Click the Appl

y button at the bottom of the screen.

Your settings are saved.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 66 67

No comments

Netgear WND930 User Manual Page 42