Netgear WND930 User Manual download pdf (Page 11)

Initial Setup

Outdoor High Power Wireless N Access Point

Connect to the Access Point and Log In

You can connect to the access point’s web management interface to view or change its

settings.

 To connect to the access point:

1. If a DHCP

server is not connected to your network, configure a computer with a static IP

address of 192.168.0.210 and a subnet mask of 255.255.255.0.

2. Conn

ect an Ethernet cable from a LAN port on the access point to a LAN port on the

computer.

During initial setup, use a wired Ethernet connection.

3. Launch a web

browser.

4. In the address

field of the browser, enter http://192.168.0.100.

A login screen displays.

5. Ente

r admin for the user name and password for the password.

The user name and password are case-sensitive.

The web management interface of the access point displa

ys the General screen.

Specify the Access Point Name and Location

You must use a computer that is configured with a static IP address of 192.168.0.210 and a

subnet mask of 255.255.255.0. During initial setup, use a wired Ethernet connection from the

computer to the access point.

 To specify the access point name and location:

1. L

aunch a web browser on the computer that is connected to the access point.

2. In the address

field of the browser, enter http://192.168.0.100.

A login prompt displays.

3. Ente

r the user name and password.

The user name is adm

in and the default password is password. The user name and

password are case-sensitive.

4. In the Access Point Name field, type the access point name.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 66 67

No comments

Netgear WND930 User Manual Page 11